Industrial process pressure gauges are known to its rigidity and are capable to fight with corrosive / dusty, moisture-based environment because of its construction. It is used widely for general industrial process pressure measurement. KHG10 and KHG20 are manufactured with SS 304 case and bezel and SS 304 wetted parts. Available in weather proof and glycerine filled…
|
General Specification |
|
|
Reference Standard |
EN – 837 / IS 3624-1987 / ASME |
|
Model |
KHG10 /KHG20 |
|
Application |
Process / Hydraulic pressure measurement |
|
Type |
Weather proof (KHG10) / Glycerine filled (KHG20) |
|
Nominal Diameter |
2” (50 mm) 2 1/2” (63 mm) 4” (100 mm) 6” (150 mm) |
|
Case Material |
304 St.St. |
|
Bezel Material |
304 St.St. |
|
Bezel fitting |
Crimped / non-openable |
|
Stem/ Socket Material |
304St.St. |
|
Sensing Element |
304 St. St / 316L St.St Bourdon tube |
|
Joint |
Argon arc welded |
|
Movement |
SS304 / Brass |
|
Pointer |
Black Aluminium - |
|
Dial |
White coated Aluminium |
|
Marking |
Black ‘or’ Black and red combination for dual scale |
|
Scale |
Single / Dual |
|
Standard Unit |
kg/cm2 with psi (All other standard engineering units are available on request) |
|
Mounting |
Please refer the mounting chart |
|
Thread |
1/4” / 3/8” / ½” NPT / BSPP / BSPT; M 20 X 1.5 |
|
Window |
Polycarbonate / Acrylic / Toughened glass |
|
Available in |
Pressure / Compound / Vacuum |
|
Minimum Range |
0 to 0.6 kg/cm2 / bar |
|
Maximum range |
0 to 2500 kg/cm2 / bar |
|
Over Pressure |
130% FS Short time |
|
Case filling liquid |
Glycerine / non-conductive fluid for Electric contact |
|
Accuracy |
+/- 1% ‘or’1.6% of FSD |
|
Additional Fitment |
Optional* |
|
Calibration Certificate |
Factory calibration certificate shall be provided |
|
Material TC |
Shall be provided on request |
|
Additional Fitment Accessories |
|
|
Snubber/ Dampner |
Isolation Valve / needle valve |
|
Siphon |
Gauge saver/ Over Pressure protector |
|
Gauge cock |
Cooling tower |
|
Siphon with gauge cock |
|